this ine that i made is really cheap to make

it only takes sometime to build it  by 187poepvlieg

used

1x CD spindle case

1x battery holder

2x AA batteries

100x led 5mm white

used

1x CD spindle case

1x battery holder

2x AA batteries

100x led 5mm white

front view of ringflash box, originally uploaded by Chun Wu.

front view of DIY ringflash box

I’ve been itching to make a DIY ring flash for sometime but had no luck finding a bundt pan to work with.

nickwheeleroz version (link below) of the home-brewed ringflashes got me down to work. I had followed his steps, then realized the cardboard box alone wasn’t sturdy enough for holding two flashes. I made enforcements by building an aluminum frame for the unit.

However, building the frame alone took alot of effort. Drilling, assembling, measuring then disassembling – repeat. Certainly something I enjoyed ;)

As a result the whole unit is stable! The only downside is, it’s heavy, bulky and ideally to remain on a heavy-duty tripod. My unit without flash & camera weighted 1.2 kg (almost 3 lbs!)

I had high hopes that I could carry that thing around, but after a few tests shots off tripod, my left arm went jelly.

I think this will be my next ringflash project, which seems reasonably light and compact :
www.flickr.com/photos/craigwhitephotography/2232019806/in…

Credits for the boxed ringflash go to nickwheeleroz:
www.flickr.com/photos/nickwheeleroz/2281061700/

To see/read more on this project, view the rest of the set:
www.flickr.com/photos/lazybatusu/sets/72157623072034190/

DIY Ring Flash, originally uploaded by Jamie D P.

Here is a home made DIY ring flash that I am building.
I will post more images soon as it is now working, when this was taken I had not added any electronics apart from the Xenons.

It now has a 240v mains power supply I designed and built, it will also run on 4 AA batterys, it has a recharge time of < 1 second, it has a wireless trigger or triggered by cable sync.

Halter für Eigenbau-Ringblitz, originally uploaded by Rainer.Steinke.

Halter für Eigenbau-Ringblitz

Der Vollständigkeit halber…
Habe nun den Halter geändert, kein Holz mehr sondern Acryl-Glas/Plexi-Glas.

Aus dem Reflektor-Gehäuse ragen nun von innen zwei Schlossschrauben, an denen der neue Halter mittels Rändelmuttern befestigt wird und in Langlöchern verschoben werden kann!
Für die obere Kabelabdeckung war ich bis jetzt zu faul

check this gallery :

http://www.flickr.com/photos/www-gohip-de/sets/72157622851139831/with/4191869067/

Halter, originally uploaded by Rainer.Steinke.

Halter DIY Ringflash

via http://www.flickr.com/groups/diyphotography/pool/

Der Halbfertige, originally uploaded by Rainer.Steinke.

ACHTUNG: Am Kabel zum Reflektor mit Blitzröhre ist Hochspannung, auch noch wenn keine Batterien/Akkus drin sind, ist auf dem ELKO noch ganz schön Dampf!!!!

View more pic :

http://www.flickr.com/photos/www-gohip-de/sets/72157622851139831/with/4175607513/

DIY Orbis Arm, originally uploaded by timdesuyo.

This content via flickr [Blog this photo]

I went to Tokyu Hand in Shinjuku, and got two different L-brackets, one with that screw knob and backing included for 900 yen. Got the two camera mount screws for 500 yen each at Yodobashi Camera, and then padded the connection points with left over bicycle handlebar tape, and then electrical tape. I had to file it a bit to get the middle screw backing to fit in the hole in the longer L-bracket, and for the camera mount screw to fit through the hole on the same bracket, but it works great~

DIY Ring Flash, originally uploaded by Jeremy Griffin.

Front view of the finished 2 speedlight DIY Ring Flash

read more for photosample by this diy ringflash

Homemade ring flash with Speedlights
Canon 5D markII, 24-70mm

Lighting  info:
sb-800+sb-600 DIY ring flash
www.flickr.com/photos/jeremygriffin/sets/72157622812277664/
speedos :  2 kickers in large reflectors, 2 umbrellas on grey background

DIY Poster Board Ringflash – View Original Size, originally uploaded by James Rubio.

DIY Poster Board Ringflash – View Original Size

ringflash test day bij TriMM, originally uploaded by buzzrichie.

ringflash test day bij TriMM

Operation Ringflash, originally uploaded by Akira2506.

Made a DIY ringflash adaptor for my Sigma DG550 / Canon 400D. Took a few test photos, need to take some “proper” photos with it ASAP.

Cheap DIY Ringflash design plan Diagram

How to make a DIY ring flash?, originally uploaded by eszpee.

Pretty easy and lots of fun to make a DIY Ringflash actually.

More detailed article (in Hungarian) here: kispad.hu/foto/200903/csinald-magad-korvaku.html

DIY Ringflash – Intro, originally uploaded by jphphotography.

I finally decided to try making a ringflash. I based my design around this guy’s version

www.motleypixel.com/forum/index.php/topic,80.0.html and made my own adjustments. All in all it turned out

pretty good.

DIY Ringflash – Step 1 Cut PB Jar

This step was harder than it sounds, the plastic was too thick to cut with just an olfa knife so used a hacksaw.

DIY Ringflash – Step 2 Cut the big bowl

Pretty simple if you have a dremel, my bowl was a little thicker so I just scored it with the dremel then used a pen knife to cut through it.

…

…..

……..

DIY Ringflash – Step 11 Finished Product

Voila. Yours may look a little different, for example I used the cord elastic from an old fleece jacket I had so I kept the adjustment dohicky, its not realy necessary and I figured they might not be readily available so I left it out of the plans.

I’ll hopefully have some more test shots to post later.

view more in  JPHphotography

ringflash

diy

how to

homemade studio

strobist

on axis

budget equipment