Ray Flash Ringflah Adapter Before and After example

1

 

The two images below were taken to demonstrate the lighting effect produced by the Ray Flash for close-up portraits.  The image on the left was taken using a bare flash.  The image on the right was taken using the Ray Flash.  The camera settings are the same.  Note the difference in the skin, shadow and specular highlights.

What is the Ray Flash Ringflah Adapter?

The Ray Flash (U.S. and international patents pending) is a unique adapter for your hot-shoe flash unit designed to replicate the lighting effect produced by traditional, expensive, and heavy powered studio ring light units.

The Ray Flash is portable and lightweight, and has been designed to take advantage of a camera’s TTL metering capabilities.  Because the Ray Flash relies on the hot-shoe flash to generate its light, it contains no electronics, no flash tubes and requires no cumbersome cables.  The light distribution is accomplished through a sophisticated system of internal light-shapers designed to distribute and project the light evenly around the lens.

The Ray Flash creates the distinctive ring light effect:  a three-dimensional shadow-wrapped look around the subject.  Because ring flash light originates from a circle around the lens, it produces a virtually shadowless look on the front of your subject, while producing a soft even shadow around the edges. The versatile Ray Flash is ideally suited for fashion, wedding, portrait, journalist and macro photography as either a main or fill light.

Weighing just 13-14 oz, the Ray Flash is lightweight and is easily supported by hot-shoe mounted flash units. The 4 1/8” internal diameter of the Ray Flash is large enough to accept almost all professional lenses from Nikon & Canon.

The Ray Flash is specifically designed for the Canon 580EX (I & II), Nikon SB800 and Nikon SB900 flash units.  However, existing Ray Flash models will also fit older Nikon flash units, including the SB24, SB26 and SB600, as well as selected flash units from Sony, Metz, Olympus, and Sigma.  For the full model range please see the chart at the bottom of the page.

Model Code: Fits Camera Models:
RAN160 Nikon SB800 with D300/D200/D70/D80/D50/D40/D60/D90
RAN170 Nikon SB800 with D1/D2/D3/D700
RAN179 Nikon SB900 with D300/D200/D70/D80/D50/D40/D60/D90
RAN189 Nikon SB900 with D1/D2/D3/D700
RAC160 Canon 580EX with Digital Rebel series
RAC170 Canon 580EX with 5D (mk I & II)/50D/40D/30D/20D/10D
RAC175 Canon 580EX with 1D/1Ds/1V
RAC160-2 Canon 580EX II with Digital Rebel series
RAC170-2 Canon 580EX II with 7D/5D(mk I & II)/50D/40D/30D/20D/10D
RAC175-2 Canon 580EX II with 1D/1Ds/1V

fotet

(via http://www.expoimaging.net/product-detail.php?cat_id=8&product_id=15&keywords=Ray_Flash:_The_Ring_Flash_Adapter)

Related Posts with Thumbnails

Comments

One Response to “Ray Flash Ringflah Adapter Before and After example”

Trackbacks

Check out what others are saying about this post...
  1. [...] I just wanted to let you know that my buddy Publish9 has started a photography equipment site. Thanks Publish9, now I want a ring flash! [...]



Comments

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!